Goto list view

02-04
Snap-on (shawnee) $650
 Snap-on (shawnee) $650
This is a nice snap-on bottom box it has door on left side and two more drawers in it i will not take a penny less so dont even ask. any questions call joe 913 742 1978 Location: shawnee it's NOT ok to contact this poster with services or other commercial interests
02-04
torque wrench 3/8" NEW (overland park, ks) $27
 torque wrench 3/8' NEW (overland park, ks) $27
Torque wrench 3/8" NEW for sale. 5ft to 80ft/lbs. Nice tool/Never used/Come test it out. Come with case. If interested, please email, text, or call 651-285-8909 and leave message. Thanks. Location: overland park, ks it's NOT ok to contact this poster with services or other commercial interests
02-04
Elictric mpack (shawnee) $50
 Elictric mpack (shawnee) $50
this is a nice mpack if you dont have air works great. any questions call njoe 913 742 1978 Location: shawnee it's NOT ok to contact this poster with services or other commercial interests
02-04
Ladder Rack (Olathe, KS) $50
 Ladder Rack (Olathe, KS) $50
Asking $50 obo. Please contact Lindsay at 913.980.8687 (work/cell). Link below is provided if you need more info on the rack that I have. I have the same one from this site. http://www.northerntool.com/shop/tools/product_19670_19670 Location: Olathe, KS it's NOT ok to contact this poster with services or other commercial interests
02-04
Cordless Power Caulk Gun Milwaukee (kck) $75
 Cordless Power Caulk Gun Milwaukee (kck) $75
Used Milwaukee 2.4 volt Cordless with Speed Control Caulk and Adhesive Gun, 10oz tubes, Cat #6550-20, Plus two chargers and four batteries. $75.00 sold as is. Gun does not advance, sounds like control switch. Buying new, had this one for 10 years. Location: kck it's NOT ok to contact this poster with services or other commercial interests
02-04
Custom built heavy duty mobile mechanics workbench and tool chest (North Overland Park) $1500
 Custom built heavy duty mobile mechanics workbench and tool chest (North Overland Park) $1500
Custom built heavy duty mobile mechanics workbench and tool chest Custom ordered and built in the 70's at a cost of around $2,500 this thing is built like a tank and to last a lifetime. It moves incredibly easy on the large oil and chemical resistant wheels. The only comparison I've found new runs about $5,000. I'm more than impressed with the welds on this thing they are better than most I've seen. Its dimensions are W52" x D28" x H34". Up front there are eight full pull out drawers on the left that are W16" x D20". On the right there is a door with an area for large tools that is W16" x D24". Below that there are a couple more drawers W16" x D20". In the center there is a pull out for more storage and when it is closed it secures the door and the drawers. It does have a lock but I do not have the key, will need to be rekeyed or a new lock installed. On both ends there are cabinets with shelving. There are a couple of built in parts trays on top. On the backside there is a place to hang an extensi
02-04
New heavy duty metal wheelbarrow (Blue Springs) $35
 New heavy duty metal wheelbarrow (Blue Springs) $35
Brand new Heavy Duty Wheelbarrow used one time, still has stickers in it. $35.00 Bill 913-915-083eight Location: Blue Springs it's NOT ok to contact this poster with services or other commercial interests
02-04
New Ryobi electric sawsall w/case (Blue Springs) $35
 New Ryobi electric sawsall w/case (Blue Springs) $35
Brand new Ryobi electric sawsall w/case. Used one time. $35.00 Bill 913-915-083eight Location: Blue Springs it's NOT ok to contact this poster with services or other commercial interests
02-04
Clarke 180en mig welder (Blairstown MO) $250
 Clarke 180en mig welder (Blairstown MO) $250
This is a good little welder I've had it for 3 yrs or so. Probably have put 40-50 hrs on it. I recently purchased a larger welder so I'm selling this one. I haven't used it in 6-8 months. It have the hook up for gas which is how I ran it or you can use flux core wire. Works great for lighter stuff 1/4 in and down. Larger stuff it has a short duty cycle Has a cart a few extra tips and a partial roll of wire. Please call or text with questions 816-682-8033 Jason Location: Blairstown MO it's NOT ok to contact this poster with services or other commercial interests
02-04
Router Table (Lenexa, KS) $115
 Router Table (Lenexa, KS) $115
Craftsman 1/2" router with router table and home made stand. Location: Lenexa, KS it's NOT ok to contact this poster with services or other commercial interests
02-04
Delta Joiner (Lenexa, KS) $225
 Delta Joiner (Lenexa, KS) $225
Delta 6" joiner with extra set of blades. Excellent condition. Location: Lenexa, KS it's NOT ok to contact this poster with services or other commercial interests
02-04
### Blue-Point (Snap-On budget brand) 9.6 Volt Cordless Drill Kit ### (Shawnee) $50
 ### Blue-Point (Snap-On budget brand) 9.6 Volt Cordless Drill Kit ### (Shawnee) $50
Hello Everyone, I am cleaning up my garage, and up for sale is my Blue-Point (Snap-On budget brand) 9.6 Volt Cordless Drill Kit, complete with Variable Speeds, Reversible, 3/8" Drill, Battery, Charger, and Carrying Case (Take a look online, quality 9.6 Volt drill kits still regularly sell for Over $100 new). First person to come up with $50 obo CASH gets it.. No "holding" it for anyone, bring the cash when you come look at it. (No money orders, checks, paper clips, children, UFO's or anything else Scammers can think of). Thank you for your time. Location: Shawnee it's NOT ok to contact this poster with services or other commercial interests
02-04
### Virtually New Punch-Down Electrician Tool Kit ### (Shawnee) $50
 ### Virtually New Punch-Down Electrician Tool Kit ### (Shawnee) $50
Hello Everyone, I am cleaning up my garage, and up for sale is my Ideal Punch-Down Data Electrician Tool Kit. (Take a look online, these normally sell for over $100 brand new.) First person to come up with $50 obo CASH gets it.. No "holding" it for anyone, bring the cash when you come look at it. (No money orders, checks, paper clips, children, UFO's or anything else Scammers can think of). Thank you for your time. Location: Shawnee it's NOT ok to contact this poster with services or other commercial interests
02-04
### Virtually New Bench Grinder ### (Shawnee) $50
 ### Virtually New Bench Grinder ### (Shawnee) $50
Hello Everyone, I am cleaning up my garage, and up for sale is my Virtually New Bench Grinder. ( 6 Inch 3/4 Horsepower ). First person to come up with $50 obo CASH gets it.. No "holding" it for anyone, bring the cash when you come look at it. (No money orders, checks, paper clips, children, UFO's or anything else Scammers can think of). Thank you for your time. Location: Shawnee it's NOT ok to contact this poster with services or other commercial interests
02-04
30 Gallon Air Compressor (Midtown kc) $300
 30 Gallon Air Compressor (Midtown kc) $300
30 gallon speedaire electric air compressor. 913 915 8522 Location: Midtown kc it's NOT ok to contact this poster with services or other commercial interests
02-04
Estwing Framing Hammer 16" Waffle Milled Face USA made! (Near Bartle Hall) $20
 Estwing Framing Hammer 16' Waffle Milled Face USA made! (Near Bartle Hall) $20
Estwing 16" dimpled waffle faced framing hammer. the dimples on the face of the hammer help to control nail movement. If you know tools, you already know that Estwing are the best hammer made, period!! Solid steel, made in USA, indestructible! Price is $20, cash only please, less than half the cost of a new one! Phone calls only, (due to to constant text and email spammers). eight16- ---6nine9----2 two 2 two Thank you! Location: Near Bartle Hall it's NOT ok to contact this poster with services or other commercial interests
02-04
Estwing Framing Hammer 16" Smooth Milled Face USA made! (Downtown) $20
 Estwing Framing Hammer 16' Smooth Milled Face USA made! (Downtown) $20
Estwing 16" smooth faced framing hammer. If you know tools, you already know that Estwing are the best hammer made, period!! Solid steel, made in USA, indestructible! Price is $20, cash only please, less than half the cost of a new one! Phone calls only, (due to to constant text and email spammers). eight16- ---6nine9----2 two 2 two Thank you! Location: Downtown it's NOT ok to contact this poster with services or other commercial interests
02-04
wtb stihl saw
 wtb stihl saw
Looking for stihl saw 039 or bigger not looking to pay new price for a used saw it's NOT ok to contact this poster with services or other commercial interests
02-04
Miter Saw -Rigid 12" (liberty, mo) $280
 Miter Saw -Rigid 12' (liberty, mo) $280
Rigid 12" Miter Saw Model R4121 Double Compound Laser Trac Like New $280.00 with Stand $250.00 without stand. Call 816-929-5181. Location: liberty, mo it's NOT ok to contact this poster with services or other commercial interests
02-04
"NEW" Never Out of The Box Strait-Line X3 Laser Level (Independence,MO) $15
 'NEW' Never Out of The Box Strait-Line X3 Laser Level (Independence,MO) $15
I am selling a "NEW" Never Out of The Box Strait-Line X3 Laser Level. I bought it thinking I would use it. . ...Never did. . ..my loss, your gain. The price is $15 Cash. I live near I-70 and 40 Hwy in Independence, MO. Call my cell 816-785-5090 or email through Craigslist. Location: Independence,MO it's NOT ok to contact this poster with services or other commercial interests
02-04
Ampco P-31 Non-Sparking Pliers-Electrician-Electrical (Independence, MO) $20
 Ampco P-31 Non-Sparking Pliers-Electrician-Electrical (Independence, MO) $20
Electricians take note. . .. . .. . .Electrical-Electrician-Electrical Tools I am selling a pair of AMPCO P-31 BC, Made In USA, "Non Sparking" beryllium copper pliers. Ampco safety tools are special non-sparking tools made from corrosion-resistant, non-magnetic Beryllium Copper Alloy. Designed for use where non-sparking applications apply. These sell new for $58 to $69 on the internet. See the links below. My price is $20 Cash. http://www.drillspot.com/products/100896/Ampco_Safety_Tools_P-31_Combination_Plier http://www.blackbookoftools.com/ProductDetails.aspx?ProductID=117661 Call my cell 816-785-5090 or email through Craigslist. I live near I-70 and 40 Hwy in Independence, MO. Thanks for looking.
02-04
tool cart (northland) $75
 tool cart (northland) $75
I have a Cummings tool brand, tool cart for sale it has a keyed locking drawer only asking $75obo Location: northland it's NOT ok to contact this poster with services or other commercial interests
02-04
2-WHEELER (Raytown) $25
 2-WHEELER (Raytown) $25
TWO WHEELER IN GOOD CONDITION 816-935-5325 FOR TRANSPORTING BOXES OR MOVING LARGE OBJECTS THIS 2-WHEELER HAS 8 INCH PNEUMATIC WHEELS, AND STEEL CONSTRUCTION Location: Raytown it's NOT ok to contact this poster with services or other commercial interests
02-04
Kawasaki 19.2v Charger +3 Batteries (Kansas City) $50
 Kawasaki 19.2v Charger +3 Batteries (Kansas City) $50
For sale: Kawasaki 19.2v Class 2 battery charger plus three 19.2v batteries. Asking: $50.00 obo... Location: Kansas City it's NOT ok to contact this poster with services or other commercial interests
02-04
Woodworkers Air Filter (Lenexa, Ks) $160
 Woodworkers Air Filter (Lenexa, Ks) $160
Woodworker's supply air filter with extra filter set. Location: Lenexa, Ks it's NOT ok to contact this poster with services or other commercial interests
02-04
Sander (Lenexa, KS) $70
 Sander (Lenexa, KS) $70
Ryobi Spindle Sander with homemade stand. Excellent condition. Location: Lenexa, KS it's NOT ok to contact this poster with services or other commercial interests
02-04
New Rubbermaid Utility Cart (Raytown, MO) $200
 New Rubbermaid Utility Cart (Raytown, MO) $200
Rubbermaid Model 4530-00 Heavy Duty Utility Cart - 3 Shelf Cart - Black -Dimensions: 45-1/4"L x 25-7/8"W x 33-1/4"H -Durable structural foam will not rust, dent, chip, or peel -Rounded corners protect walls, furniture, and equipment, -Lightweight and maneuverable -Flat ergonomic handle has moulded-in toll storage compartments and cup holder -5" non-marking quiet casters- 2 fixed, 2 swivel -Holds up to 500 lbs, New in box, ASSEMBLY REQUIRED Location: Raytown, MO it's NOT ok to contact this poster with services or other commercial interests
02-04
(2) Red Post Driver (Raytown, MO) $30
 (2) Red Post Driver (Raytown, MO) $30
Great for home - farm and ranch use Heavy steel plugs for maximum driving effect Manufactured from strong steel tubing for extra long life Easy to use Painted bight red to prevent rust, 2 inside pipe diameter 29 length 16 lbs Location: Raytown, MO it's NOT ok to contact this poster with services or other commercial interests
02-04
2 Shop Smiths with accessories Must move! (Eastern Jackson County) $1000
 2 Shop Smiths with accessories Must move! (Eastern Jackson County) $1000
I need to make room as I simply do not have room for these here. I have downsized and just have a single garage to work and and do not have room. This is a Shop Smith Mark VII and a Shop Smith Model 10-ER. Both tilt up into a drill press as well. I have the original manuals with them also and a couple extra books on how to, etc. Both work so you do not need to keep changing attachments. If I had room, I would keep these but I have to get rid of them so it is a good deal for somebody. Comes with the attachements shown in the picture. I want $1000. for everything. Cash Only! No Spam...... Location: Eastern Jackson County it's NOT ok to contact this poster with services or other commercial interests
02-04
KNEX Corkscrew Canyon (Olathe) $20
 KNEX Corkscrew Canyon (Olathe) $20
KNEX Corkscrew Canyon motorized building kit in original box. Built once. All parts in kit. Original 95 page glossy instructions included Call Bob at 913 768 8133 after 5:30 weekdays anytime weekends Location: Olathe it's NOT ok to contact this poster with services or other commercial interests
02-04
Like NEW Sears Craftsman Air Compressor (Kansas Ciy - North) $250
 Like NEW Sears Craftsman Air Compressor (Kansas Ciy - North) $250
Like New Hardley used Vertical Air compressor 30 Gal 6hp Single Cylinder/Oil Free 150psi 110 plug Works Excellent Bought it brand new from sears a few years ago thinking I would use it a lot after useing it to air up basket balls and footballs and a couple of tires here and there it is more in the way then use full so I have decided to sell it. Holds air, No Leaks, Location: Kansas Ciy - North it's NOT ok to contact this poster with services or other commercial interests
02-04
Snap-On Tools for sale!!!! (Prairie Village) $1
 Snap-On Tools for sale!!!! (Prairie Village) $1
I am needing to sell these tools to help pay off some bills. I have owned them more a little more than a year. The tools have been very well maintained, and oiled regularly when needed. The items consist of a 3/8 air impact for $130, a tap and di set only used once for $60, and snap on hammer for $30, and a brand new 2011 snap on air hammer with the quick change bit for $300. I will consider most offers made. Don't low ball me I bought these tools off the truck I know what they are worth. I will only deal locally. Location: Prairie Village it's NOT ok to contact this poster with services or other commercial interests
02-04
Old Lapidary wheel (OP) $125
 Old Lapidary wheel (OP) $125
Selling an old lapidary wheel used in the gem industry for polishing gemstones. This is an old one, believed to be made in the 1940's according to some history on the Heimerdinger family of Louisville, Kentucky, the manufacturer of this neat tool. The disk on the top has grooves in it for polishing. The motor is original and so is all the paint and galvanized top. The family owned a hardware store in Louisville back in the 40's and now they have a fairly large cutlery store near Louisville. If interested, please call 816-807-7340. Please no emails. Location: OP it's NOT ok to contact this poster with services or other commercial interests
02-04
walker turner drill press (OP) $35
 walker turner drill press (OP) $35
Selling a walker turner drill press. This is a bench top drill press. It does run but would be good either for a parts press to restore another one or it could be restored. It is missing the top table. Classic old walker turner tool. Selling for $35.00. Please call 816-807-7340. Location: OP it's NOT ok to contact this poster with services or other commercial interests
02-04
Steel machine table (Overland Park) $75
 Steel machine table (Overland Park) $75
This steel table is a heavy table with a cast top, probably used in a machine shop. It measures 24" x 28". We used it for a drill press, also listed on craigslist. Selling for $75.00. If interested, please call 816-807-7340. Please phone calls only, no emails. Thanks. Location: Overland Park it's NOT ok to contact this poster with services or other commercial interests
02-04
Hilti rotory hammer drill te6-c with bits from 5/8 down to 1/4 (Topeka) $200
 Hilti rotory hammer drill te6-c with bits from 5/8 down to 1/4 (Topeka) $200
Will trade for acetylene and oxygen bottles. Call 7858061033 Location: Topeka it's NOT ok to contact this poster with services or other commercial interests
02-04
aluminum and metal tool boxes and more (Archie) $75
 aluminum and metal tool boxes and more (Archie) $75
I have a black metal tool box and an aluminum full size truck box. Also a headache rack. Two stihil chainsaws 024 and 025 need work can't say much about and much more call for info and pics. 816-284-7718 Location: Archie it's NOT ok to contact this poster with services or other commercial interests
02-04
Enerpac P80 Hydraulic Hand Pump (Raytown, MO) $300
 Enerpac P80 Hydraulic Hand Pump (Raytown, MO) $300
Enerpac steel hydraulic hand pumps are the solution for tough jobs. The P-80 is a two speed operation for less operator fatique. This pump also features an internal pressure relief valve for overload protection, and large oil capacities to poer a wide range of cylinders or tools, new pressure guage installed and newly painted. Location: Raytown, MO it's NOT ok to contact this poster with services or other commercial interests
02-04
Truck Tool Box (leavenworth) $125
 Truck Tool Box (leavenworth) $125
i have a silver diamond plated tool box for a smaller truck for sale has been used but still in good condition text (913)306-3928 or email for more Info! NO PHONE CALLS!! Location: leavenworth it's NOT ok to contact this poster with services or other commercial interests
02-04
Lincoln 120 volt wire feed welder (Kansas city Kansas) $100
 Lincoln 120 volt wire feed welder (Kansas city Kansas) $100
Cleaning out my shop.works fine bought new. Needs wire Location: Kansas city Kansas it's NOT ok to contact this poster with services or other commercial interests
02-04
Electric Airless Paint Sprayer (Olathe) $225
 Electric Airless Paint Sprayer (Olathe) $225
Campbell Hausfeld Electric Airless Paint Sprayer Newly refurbished by manufacturer Model - RBPS250A 1/3 HP .23 GPM 25' Hose Plastic Gun 413 Rev Tip Gary 816-728-6013 Location: Olathe it's NOT ok to contact this poster with services or other commercial interests
02-04
Lincoln Air Hose Reel (Olahte) $195
 Lincoln Air Hose Reel (Olahte) $195
Lincoln Air Hose Reel (New) Model - 6L33 Hose - 3/8" x 30' Gary - 816-728-6013 Location: Olahte it's NOT ok to contact this poster with services or other commercial interests
02-04
Dura-Stilt F18" Drywall/Sheetrock Stilts (OP,KS by JCCC) $60
 Dura-Stilt F18' Drywall/Sheetrock Stilts (OP,KS by JCCC) $60
The F18" fixed height Dura-Stilt is the lightest, most efficient stilt available for commercial use. I am selling this pair as my grandfather is too old to use them anymore. $60 cash firm as these are $218 brand new. Location: OP,KS by JCCC it's NOT ok to contact this poster with services or other commercial interests
02-04
PORTER CABLE COMPRESSOR +3 GUN SET WITH CASE HARDLY USED!!! (Grandview, MO) $500
 PORTER CABLE COMPRESSOR +3 GUN SET WITH CASE HARDLY USED!!! (Grandview, MO) $500
I am selling a nearly new Porter Cable air compressor Comes with: 18 gauge nail gun 16 gauge nail gun 18 gauge staple gun Hose (not pictured) Need to sell fast. Will consider all reasonable offers. Call or text 904.859.2049 Location: Grandview, MO it's NOT ok to contact this poster with services or other commercial interests
02-04
80 Gallon Ingersoll Rand 220V (Lawrence) $250
 80 Gallon Ingersoll Rand 220V (Lawrence) $250
It is a newer 80 gal Ingersoll Rand 220v 135psi unit. I bought it from a guy with a cabinet shop. The electric motor 5 h.p. seized from the saw dust. I drained the tank and there was still the factory tank oil in it with no rust. It is not a dual stage it is a single pump that turns at 1000 rpm apposed to the duals turning at 1600. I think this would make for a more efficient and quieter compressor. I will attach some pictures. New this compressor is going for 1100. This is a great deal. I'm moving and don't have the space for this large of a compressor. 250 Firm 785-766-5546
02-04
Transmission jack (Topeka ks) $100
 Transmission jack (Topeka ks) $100
All there. Used but works good. Cash only. 7858061033 Location: Topeka ks it's NOT ok to contact this poster with services or other commercial interests
02-04
NIB - Universal Bender (Gardner) $200
 NIB - Universal Bender (Gardner) $200
New In Box (never used). Grizzly Universal Bender #G7153. This is the picture from the Grizzly site as this item is still in the box & not assembled. Check out the Grizzly site for more info. New from Grizzly is $239.95 + $20 shipping. $200 you pick up. Posting will be removed when item is no longer available. Location: Gardner it's NOT ok to contact this poster with services or other commercial interests
02-04
Paint BOOTH Filters CHEAP
 Paint BOOTH Filters CHEAP
Listing these at HALF of retail! Made by Viskon Aire for paint spray booths. 4 boxes VIS-017-241 OS CS 1 36inX100inX2inBINKS $50 each Stock up while the price is right! 816-838-0862 I am south west of Harrisonville it's NOT ok to contact this poster with services or other commercial interests
02-04
New Articulating Ladder (Prairie Village) $100
 New Articulating Ladder (Prairie Village) $100
never used heavy duty 250lb rating multi position ladder Location: Prairie Village it's NOT ok to contact this poster with services or other commercial interests
02-04
post drill with bits (Garden City, MO) $100
 post drill with bits (Garden City, MO) $100
old post drill with the drill bits for the type of chuck it has every thing works $100.00 816-582-7748 Location: Garden City, MO it's NOT ok to contact this poster with services or other commercial interests