Great for big light productions club, theatre, touring, etc... make an offer..... 4-48 Circuit Dimmer Panel The Tech Director series of two-scene preset control consoles provides inexpensive, high-quality, full-featured two-scene preset controls. The Tech Director is designed for use in performance applications including clubs, theaters, dance, music, and touring. While primarily designed to operate with Teatronics Lighting Controls' dimmers, the Tech Director is also able to drive other manufacturers dimmers with analog control voltages under 15 volts DC Output connections are made through a SRC, all-metal, circular SRC connectors, designed for rugged reliable connections. Our standard output voltage is 0-10 volts DC Tech Director consoles are built of aluminum and steel with an attractive and functional low sloping profile. Extended oak end-plates protect knobs and switches. The circuitry is modular and replacing components takes only moments Features: Features Console "On" (Green) LED Blackout switch with (Red) LED Split, Dipless Crossfader with two timers and bar graph Bump ON/OFF switch with LED A,B,C,D Submasters Bump Button for each CHANNEL Bump Button for each SUBMASTER Bump/Solo Selector Work Light Control Grand Master with timer Independent Master with timer Four or Eight Channel Chase with: Rate control Intensity control Forward/Reverse switch Chase ON/OFF switch A/B or C/D submaster switches for each channel in each scene LED output indicators Twelve channel output cable with metal SRC connectors Outputs diode protected for pile-on with other controllers Active control console (Requires 120 volts AC) 60mm channel slider controls in scene X, scene Y configuration Available in channel configurations up to 60 channels, by grouping of 12 Specifications: Enclosure dimensions: (H x W x D) 12 channels: 5.5 x 21.0 x 15.0 in. (14.0 x 53.3 x 38.0 cm) 24 channels: 5.5 x 31.0 x 15.0 in. (14.0 x 79.0 x 38.0 cm) 36 channels: 5.5 x 40.75 x 15.0 in. (14.0 x 103.5 x 38.0 cm) Weight of enclosure : 12 channels: 17 lbs. (7.7 kg) 24 channels: 22 lbs. (10.0 kg) 36 channels: 27 lbs. (12.3 kg) Work light controls Blackout switch with LED Bump On/Off switch with LED Bump/Solo selector Grand Master with timer Independent Master with timer Split/Dipless Crossfader with two timers and LED bar graph 4 or 8 channel chase with: Rate control Intensity control Forward/Reverse switch Chase On/Off switch Two Submasters per scene with bump buttons A/B or C/D submaster switches for each channel in each scene Bump/Solo buttons on each channel LED output indicators on each channel 12 channel output cable Outputs diode protected for pile-on with other controllers Active control console (requires 120 volts AC) 60mm channel slider controls in scene X, scene Y configuration Power ON/OFF switch mounted on the back panel Location: SE it's NOT ok to contact this poster with services or other commercial interests oregon